Page | 1 | 2 |

Pole Adapter Kit

The pole adapter kit is a mounting bracket that safely attaches a saw to the pole. The saw pivots on a plate which is attached to the side of the saw. The pole adapter has a chain tightening base, and a safety stop to halt the swing of the saw after the cut has been made. Use this adapter kit while cutting off sections of a pole when the pole has to be removed. Chain saw not included.

Weights: Kit - 14 lbs (6.35 kg); Swivel Plate with Stand-off Stud - 1 lb (0.45 kg); Stand-off Stud Only - 3 oz (84 g).

Adapter Kits
Type of Saw
Kit
Cat. No.
Swivel Plate with Stand-Off Studs
Cat. No.
Stand-Off Stud Only
Cat. No.
Ackley Hydraulic
3112
3112ES
3112F
Echo 302S (330S)
3123
3123ES
3123F
Echo CS4500 (4600)
3122
3122ES
3122F
Fairmont Limb Loper
3113
3113ES
3113F
Homelite Super 2
3116
3116ES
3116F
Homelite 240
3117
3117ES
3117F
Homelite XL
3110
3110ES
3110F
Homelite XL925
3119
3119ES
3119F
Homelite EL16
3124
3124ES
3124F
Husqvarna
3120
3115ES
3115F
McCullough
3121
3121ES
3121F
Milwaukee 6215
3125
3125ES
3125F
Poulan
3111
3111ES
3111F
Stanley CS05 and CS06
3118
3118ES
3118F
Stihl
3115
3115ES
3115F
Thor Chain
3114
3114ES
3114F

Parts for All Saws
Cat. No. Description
Weight
3100D Mounting Frame Only
10 lbs (4.55 kg)
3100DSC Mounting Frame with Screw, Chain, Nut and Handle
14 lbs (6.35 kg)
3101 Chain Saw Cover
8 oz (0.22 kg)
175ES 4' Chain, Screw, Nut and Handle
4 lbs (1.81 kg)
520FB Storage Box with Inserts
60 lbs (27.20 kg)

Pole Adapter Kit illustration


Pole Adapter Kit

Pole Draw Bar

Cat. No. Description
Weight
9300 Pole Draw Bar (complete)
60 lbs (27.21 kg)
930HP Pole Draw Bar with Bolt Hole and One Chain Binder
60 lbs (27.21 kg)

Replacement Parts
Cat. No. Description
Weight
9300C Chain, Screw and Snap
4 lbs (1.81 kg)
9300E Toggle Handle and Nut
1 lb (0.45 kg)
9300M Pointed Screw
3 oz (84 g)


Top of Page

Pole Draw Bar

The pole draw bar attaches to the pole by placing the end stop of the bar against the end of the pole. Secure the bar to the pole with the two chain and screw binders affixed to the bar. The pole draw bar is supplied with lifting handles on each side and a safety loop through which a chain is attached. The oval hole is large enough to fit all hitches. (Check local vehicle safety chain regulations.)

SAFE TOWING CAPACITY: 10,000 LBS (4,530 KG).

Work Platforms

Work Platforms 1
Work Platforms 2
Cat. No. Description
Overall Length
Board Length
Weight
175 Platform
6'3" (1.91 m)
6' (1.83 m)
48 lbs (21.76 kg)
178 Platform
8'4" (2.54 m)
8' (2.44 m)
72 lbs (32.64 kg)
17530 Platform
38" (0.97 m)
30"(0.73 m)
30 lbs (13.65 kg)
*Platforms 8'4" (2.54 m) must be shipped by truck.



Parts
Cat. No. Description
Weight
175H Board Only for 175
30 lbs (13.65 kg)
178H Board Only for 178
35 lbs (15.92 kg)
119 Safety Rail
19 lbs (8.62 kg)
119H Strap with 2 Snaps
2 lbs (0.91 kg)
119B Base Only
10 lbs (4.55 kg)

Work platforms are made of laminated wood and covered with a non-skid coating to prevent slipping. The folding feature requires less space for storage and makes it easy to take the platform up through wires safely. Each platform is tested at 500 lbs (227 kg) on the outer end of the board.

A single chain fastens the platform to a pole or steel tower and prevents the platform from swinging or slipping sideways. The chain is tightened by means of a quick-adjusting screw.

Use the 30" (76.2 cm) platform (Cat. No. 17530) when a short, lightweight board is needed. The platform is wide enough for a man to sit comfortably and is ideal for installing switches and cutouts. Cat. No. 17530 folds to a compact size of 13" (32.5 cm) wide, 38" (95 cm) long and 33/8" (8.6 cm) deep.

The safety rail attaches to the platform after the platform has been installed on the pole. The strap helps eliminate the possibility of a lineman falling, and permits the lineman to move about freely while doing his work from the platform. SWL at 2:1 - 250 lbs (113.4 kg)

Work Platforms 3

 

Top of Page

Cable Spreaders

Cat. No. Description
Weight
50200030 3" (7.6 cm) Conduit
5 lbs (2.27 kg)
50200040 4" (10.2 cm) Feed Tube
8 lbs (3.63 kg)
50200041 4" (10.2 cm) Conduit
7 lbs (3.17 kg)

Cable spreaders allow cable to feed smoothly over ball bearing rollers.

Cable Spreaders 2 Cable Spreaders 3

 

Top of Page

Cable Spreaders 1

Page | 1 | 2 |